HeadLigh3RB2016
Autopure LED 超高亮汽車大燈 頭燈 完全取代高熱HID燈
LED
Autopure High Power Super LED Head Light for
revolution for the HID car head light
LED conversion kit headlight bulbs for cars trucks and SUVS
ETI Phillips Quality LED Bulbs LED HEADLIGHT BULB led headlight bulbs
2016
LED HEADLIGHT
40W 3000Lm
Heat Dissipation: Flexible Copper Braid
H1
H3 H4 H7 H8 H9 H11 H13 H16 HB1 HB2 HB3 HB4 HB5 9003 9004 9005 9006 9007
ETINVC
TX-3570 Philips chips
LED Car head light 4800Lm 6000K super WHITE clear light
The best solution to substitute HID
bulb lights
Bright as 35W HID
Draw less power from battery
No
Cooling Fan
No need warm up
No need ballasts
No need relay
No more worry ballast die
No error code issue
No Flicker issue
|
High-quality, high-power
40W 3000Lm each bulb,
LED car headlights made by
the newest ETINVC
TX-3570
Philips chip (Best quality,
and performance chips), Brass braid accelerate
the heat dissipation to better heat
dissipation.
2016 Automotive LED headlamps advantages
TaiwanWhite® LED lights more power than traditional halogen energy,
Although, Xenon lamp brightness and proximity but LED lights light up without delay,
to enhance road safety. Instant start no strong currents impact,
effectively
protecting the car battery, improving battery life of more than
30%
Fast cooling the appearance of the most advanced no fan design.
Power driver with wide voltage constant current mode,
the car
can respond to a variety of voltage instability, the effective protection of
normal use LED efficient and simple structure,
fewer components damaged,
Repair the
probability is very low, Operating temperature is low,
compared with HID ballast repair lower than 80% and Xenon high working temperature,
The standard style HID ballasts are hard starting, this means when the ballast
fires,
it sends full power to the cold bulb. Over time this shortens the bulb life and
reduces visibility.
Digital ballasts are soft starting, this means when the ballasts fire, it starts
by
sending a low amount of power to the bulb and steadily increases power over
the next minute until the bulb is to
its maximum brightness.
This gives more life to your HID bulbs, more vivid colors, and gives you more
visibility.
LED car headlights simple structure, fewer parts than Xenon lamps, no
ballast, no fan with
simple LED driver instant light up, significantly
lower than the Xenon lamp failure rates.
Warranty
All of our LED Conversion Kits are
covered by a 1-Year Warranty.
The warranty covers any factory
defects with the bulbs.
If the
product stops working within 1-Year from the date you purchased it,
send it
back to us and we will replace the defective item. It's as easy as that!
Keep in
mind that our defective rate on LED kits and parts is less than
0.43% so you can feel free to
buy.
Legal situation:
What makes the HID conversion kits illegal is that the halogen headlamps
are not
designed to cut-off the HID light properly,
and hence, there is a danger of blinding the oncoming
traffic.
Install
Caution
1. As
a safety precaution, make sure that the car has had time to
cool down properly
before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles
lighting.
5. Be careful to avoid crushing or cutting the
bulbs.
Also make sure to not touch the bulbs with your fingers, as this will
cause blotting.
6. Fully examine the connection of the contact
points,
ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does
not come in contact with
the interior light shield of the headlight when
adjusting the bulb
TaiwanWhite® 2016 40W LED Head light 3000Lm 3000K/4500K/6000K
The
3rd Generation Intelligent control LED ETINVC
TX-3570 chip without cooling fan
High heat dissipation performance product.
Super
Quality H1 H3 H4 H7 H8 H11 H13 9004 9005 9006 9007...
Not
need Ballasts, Not Need Relay and Not Need Cooling fan.
CAR AUTOMOBILE LED HEADLIGHT BULB
3000Lm 40W H1H3H4H11H13 9005 9006 9004 9007
H4 40W 4800Lm Headlight Bulb Low Beam On DB-Benz | H4 40W 4800Lm Headlight Bulb High Beam On DB-Benz |
H1 H3 H7
H13 H16
H4/9003/HB2
9004/9007/HB1/HB5
9005/HB3/H10
9006/HB4
H8/H9/H11
Working Power:40W
Light Source: ETINVC
TX-3570
PHILIPS CHIPS
Operating Voltage: 12-24V DC
Waterproof Rate: IP65
Optional Color: Black
Color Temperature: 3000K/4500K/6000K
Housing Material: Aviation Aluminum and copper
Heat Dissipation: Flexible Copper Braid
Lumen: 3000Lm X 2 two bulbs 6000Lm
Life Span: about 30000 hours
Operating Temperature: -40 - +80
Install Space: L160mm X W25mm
Lumen/W: 120Lm/W
Weight: 0.55Kgs/set
TaiwanWhite®
H4
9004 9007 Bi-beam far/near headlight bulbs,
ETINVC
TX-3570
high power chip, free to modify, it is as simple as replacing light bulbs,
direct change (replacement:
took a photo of original device, after loading in order to change).
Not a HID Xenon lights,
power-saving LED headlights with high light low calorie.
Super power, electricity consumption about
1/3 one-third 35W HID and
1/5 one-fifth of general halogen bulb power consumption.
And a longer lifespan than halogen lamps, HID.
No cooling fan design.
Life time More than 30,000 hours ; not more broken by
failure LED lights fan and
the high temperature melting, burning the whole lamp,
Permanent settlement LED heat sink problem.
ETINVC
TX-3570
Philips chips special designed for automobile industry,
Philips chips on board
High
temperature resistant :2.50
°C/W 。
No cooling fan design equipped with 6063
Aerostatic
aluminum heat sink,
water proof IP65,Color
temperature 3000K/4500K/6000K,
http://www.cree.com/LED-Components-and-Modules/Products/
Even in 100-degree
temperature only 5% light attenuation efficiencies.
Copper threads braid radiators to form a
meshed structure, best heat conduction.
More advanced use of professional automotive ETINVC
TX-3570
chips (heat resistant up to 150
°C)
become the subject of your car headlights, enjoy luxury car level LED head
lamps of superiority.
Don't
know your Bulb size please go to :
http://www.sylvania.com/en-us/applications/automotive-lighting-systems/Pages/lrgmain.aspx
How to install H4 High/Low LED 40W 4800Lm 6000K on W124 1996 Mercedes Benz
Removed your HID kits/Stock bulbs
Insert new LED into your Headlight Housing and locked with spring clip
Connected your H4 LED wire to your stock socket
All connected you are good to go
Item No. | Specification Dimension (mm) | Box Package | |||||
H4 9003 HS1 HB2 |
|
|
|||||
H7 |
|
|
|||||
H11 H8 H9 H16 |
|
|
|||||
9005 H10 HB3 9006 |
|
|
|||||
H1 |
|
|
|||||
H3 |
|
|
|||||
9004 |
|
|
|||||
9007 |
|
|
LightSourceTestReport
Code Error issue: contact us you may need a Code Decoder
autopure@ms3.hinet.net
Hot Line:+886 2 23657700
Mexa
e-mail:
Mexa@capads.com
Home
Inquiry
-Mail
Us: autopure@ms3.hinet.net
Mexa Co., Ltd.
3F., No. 128 Gu Ling street, Taipei, Taiwan 100
Tel.+886223657700 Fax.+886223657702
Factory: No. 91 Kung Ming Road, Tsun Tou Liau Industry Area, Tainan, Taiwan Tel.06-2467820
©This page is copyrighted by Mexa Co., Ltd. since Jan. 2015