Capadd Capads Adscap Adcap Add on cap Add a cap Hubads
Not rotate Non-rotating Display wheel cover Advertising hubcap Promotion hub cap
wheel
cover hubcap abs wheel cover manufacturer center cap trim rim chrome
trim ring hub cover spinner spinning wheel cover not rotating hubcaps
hubcap hub cap advertising wheel cover Non-rotating hubcaps Non rotating hubcap
Non-rotating wheel cover hub ads motion ads hub cap advertising stay still
hubcap cap add on hubcap
® Slimline™ wheel cover manufacturer since 1982 HOME
¡@
One day all wheel cover will be made in this way
EurolinEÒ Slim line Color Box
¡@
EurolinE® Slimline package dimensions and container load capacity:
EurolinE® Slimline 4PCS a SET in a COLOR BOX (set of 4PCS) |
13" 4pcs/set/box - 1 set in a color box/ 37.00x8.0x37.60cm / 0.40¡¦cf /1.80 Kgs. 14" 4pcs/set/box - 1 set in a color box/ 39.50x8.0x40.10cm / 0.45¡¦cf /2.00 Kgs. 15" 4pcs/set/box - 1 set in a color box/ 42.50x8.0x43.10cm / 0.52¡¦cf /2.05 Kgs. 16" 4pcs/set/box - 1 set in a color box/ 44.50x7.5x45.10cm / 0.53¡¦cf /2.80 Kgs. |
¡@ |
EurolinE® Slimline 4PCS a SET in a COLOR BOX, 4 sets/boxes per Master carton |
13"
4pcs/set/box - 4 sets per master carton 38.18x35.15x38.48cm / 1.82' cf / 6.20 Kgs. |
¡@ |
EurolinE® Slimline 4PCS a SET in a COLOR BOX, 5 sets/boxes per Master carton |
13"
4pcs/set/box -
5 sets per master carton
16.34"X15.03"X15.15" / 2.16' cf /
7.50 Kgs. |
¡@ |
EurolinE® Slimline wheel cover container load: |
1x20'ft 13" 2204~2223 sets. 1x40' 13" 4375~4412 sets. 1x40'HQ 13" 4885~4927 sets. 1x20'ft 14" 1792~1806 sets. 1x40' 14" 3557~3586 sets. 1x40'HQ 14" 3972~4004 sets. 1x20'ft 15" 1577~1590 sets. 1x40' 15" 3131~3156 sets. 1x40'HQ 15" 3496~3524 sets. 1x20'ft 16" 1720~1737 sets. 1x40' 16" 3415~3448 sets. 1x40'HQ 16" 3813~3850 sets. |
¡@
SlimLine™ Installation
1. The last two numbers on your tire will indicate proper wheel cover size
(12",13",14", 15", 16" and 17"). See Fig. 1 Example: A tire with a size code of 15 inch uses a 15 inch wheel cover |
|
2. Remove used wheel cover (hubcap) from
wheel rim. Ensure the mounting-clips are seated firmly within the wheel cover blocks. See Fig. 2 |
|
3. Position the new wheel cover on wheel rim and guide the tire valve stem
through a slot in the wheel cover. Make sure all the wheel cover mounting-clips (4 or 5 clips) fit over the wheel rim. See Fig. 3 |
|
4. Holding the wheel cover firmly in place, locate the mounting-clips of the wheel cover. Use the rubber mallet to tap the outer edge of the wheel cover mounting-clip until it is seated firmly against the wheel rim. See Fig. 4 | |
5. Repeat step 4. for each wheel cover mounting-clip until all the
mounting-clips are seated firmly against the wheel rim. |
|
6. Use the tack puller or the slotted screwdriver to pry free each mounting clip from the wheel rim. See Fig. 5 |
¡@
Traditional wheel cover Spinner wheels/Hubcap Wheel Spinner
Steel Wheel-Replica WireWheelCover CapAds® Not Rotating Hubcap
¡@
Home Inquiry -Mail Us: mexa@capads.com
CarAccessoriesMexa Co., Ltd.
since 1979Factory :No. 66 Kung Ming 2nd Road, Tsun Tou Liau Industry Area, Tainan, Taiwan Tel.09-1019-6666
Mexa Co., Ltd.© since Jan. 1996
wheel
cover hubcap abs wheel cover manufacturers and suppliers center cap trim rim chrome
trim ring hub cover spinner spinning wheel cover
not rotating hubcaps
hubcap hub cap advertising wheel cover Non-rotating hubcaps Non rotating
hubcap Non-rotating wheel cover
hub ads motion ads hub cap advertising
stay still hubcap cap on cap add on hubcap