ABS Plastic Wheel Cover Hubcap Trim Rim Autopure Installation

Capadd Capads Adscap Adcap Add on cap Add a cap Hubads
Not rotate Non-rotating Display wheel cover Advertising hubcap Promotion hub cap wheel cover hubcap abs wheel cover manufacturer center cap trim rim chrome trim ring hub cover spinner spinning wheel cover not rotating hubcaps hubcap hub cap advertising wheel cover Non-rotating hubcaps Non rotating hubcap Non-rotating wheel cover hub ads motion ads hub cap advertising stay still hubcap cap add on hubcap

Installation:

Please note the installation in our web page yellow pictures
http://www.autopure.com.tw/tradi.htm

Fit the steel ring into the plastic clips aligning the
kink for the tire valve with that in the wheel cover

Adjusting steel ring with push/bend the welding points,
press the wheel cover on to the wheel against to the tire valve
first then applying pressure gently around the edge

For a better installation: recommend to use a long flat screwdriver
or tool to press in the out coming retention legs

Warning! Don't just squeeze hubcap into wheel, it will cause an incorrect
installation, will bend and break retention legs

Re-installation

Re-install Autopure Capads1 on the steel wheel:

Please recover bended wire ring back to it's original proper circle before you re-install Autopure, Capads1 (once it was taken out from wheel, you have to recover wire ring proper circle, for anew put on wheel.)